Scalloped Cookie Cutter With Dimple Press – 60mm

Produced using a combination of 3D printed parts and A2 Stainless Steel pins, our 60mm scalloped cookie cutter with matching dimple press is a massive time-saver!

PLEASE NOTE – THIS VERSION IS NOT DESIGNED TO BE USED WITH OUR FONDANT EMBOSSING STAMPS!!!
The ring of pins on this item is likely to produce dimples on top of any stamped text.
For use in combination with our stamps, you should purchase the 70mm version.

No need to manually add those trendy dots around the outside of your icing! You can now produce 18 evenly spaced dots with an even and consistent depth in one hit with our cunningly designed dimple press!

When used in combination with the matching scalloped cutter, the press will produce dots approximately 2mm in diameter and 2.5mm deep (with 4mm thick icing/pastry)

3D printed components are produced using environmentally friendly PLA filament (made from vegetable based starches). The stainless steel pins are pressed through precision holes in the print and are held strongly in place without the need for adhesives. A2 Stainless Steel is the grade commonly used in the production of catering equipment and cutlery.

The 3D Printing process may result in surface imperfections (which will not impair usability).

Carefully hand wash before first use and after every use in warm water. DO NOT place in the dishwasher.

Approximate dimensions:

Cutter diameter: 60mm (outside), 53mm (inside). Pins form a circle 52mm in diameter measured at the centre of the pins.

Steel pins are 2mm in diameter and will produce holes approx 2.5mm deep in 4mm thick material when used with the included cutter. Maximum hole depth without the cutter is 5mm.

Maximum cutting dept: 12mm