Scalloped Cookie Cutter With Dimple Press – 70mm

UPDATED VERSION WITH STAINLESS STEEL PINS!

Produced using a combination of 3D printed parts and A2 Stainless Steel pins, our 70mm scalloped cookie cutter with matching dimple press is a massive time-saver!

60mm version is also available here.

Our scalloped cutter in action – seasoned bakers will be much quicker!

No need to manually add those trendy dots around the outside of your icing! You can now produce 24 evenly spaced dots with an even and consistent depth in one hit with our cunningly designed dimple press!

When used in combination with the matching scalloped cutter, the press will produce dots approximately 2mm in diameter and 2.5mm deep (with 4mm thick icing/pastry)

3D printed components are produced using environmentally friendly PLA filament (made from vegetable based starches). The stainless steel pins are pressed through precision holes in the print and are held strongly in place without the need for adhesives. A2 Stainless Steel is the grade commonly used in the production of catering equipment and cutlery.

The 3D Printing process may result in surface imperfections (which will not impair usability).

Carefully hand wash before first use and after every use in warm water. DO NOT place in the dishwasher.

Approximate dimensions:

Cutter diameter: 70mm (outside), 65mm (inside). Pins form a circle 60mm in diameter measured at the centre of the pins.

Steel pins are 2mm in diameter and will produce holes approx 2.5mm deep in 4mm thick material when used with the included cutter. Maximum hole depth without the cutter is 5mm.

Maximum cutting dept: 12mm